Custom Industrial Fan-High Temperature Fan-Stainless steel fan-Centrifugal fan-Mine fan-Huayu fan
Focus on Mine fan +8618264373787 Popular search: Stainless steel fan / Centrifugal fan / Mine fan

PRODUCT CENTER

Custom Industrial Fan

Date of issue:2022/12/5 11:03:21 Number of Views:

Custom Industrial Fan:

Custom Industrial Fan, Y5-47  centrifugal fan product introduction Y5-47 centrifugal fan has a specific  number of revolutions between the centrifugal fan and the axial flow fan, and  has the higher pressure coefficient of the centrifugal fan and the higher flow  coefficient of the axial flow fan. . Y5-47 boiler centrifugal induced draft fan  is an early popular fan in China,  but it is also the most probable fan to date, its full-pressure efficiency can  reach 90.5%, mainly with burning various coal quality. The 1-20t/h industrial  boiler with smoke elimination and dust removal device is suitable for the Y5-47  centrifugal fan. 


However, the maximum temperature should not exceed 250 °C. Second, the Y5-47 boiler  centrifugal fan features the current industrial boiler series, the quality of  coal burning is very different, the resistance of the dust collector used is  different, the required air volume and wind pressure of the induced draft fan  are different, in order to adapt to the above In view of the economics of the  fan, the Y5-47 centrifugal fan requires more power than the induced draft fan  of the 20-ton boiler, while the (D-type) coupling is directly connected to the  transmission, and the rest are made of triangular tape (C type). ) Transmission,  Y5-47 centrifugal fan can not only meet the requirements of various dust  collectors of the same tonnage boiler with different speeds, but also reduce  the series and machine number of the fan, and it is also convenient for the  user to change according to the actual situation. Spindle speed to achieve the  desired air volume and wind pressure. 


The structure of Y5-47 centrifugal fan is  reasonable, the manufacturing process is relatively simple, the maintenance is  convenient, it is not easy to damage, and the warranty period is long. It is  still the mainstay in various fans matched with the boiler. Third, Y5-47  centrifugal boiler fan type 1, Y5-47 centrifugal fan can be made into two types  of left and right rotation. Y5-47 centrifugal fan from the transmission part of  the official fan, such as the impeller clockwise rotation is called right  rotation, with "right", counterclockwise rotation is called left  rotation, with "left". 2. The position of the air outlet of the Y5-47  centrifugal fan is expressed by the angle of the air outlet of the casing.  "Left" and "Right" can be made into three angles of  0°90°180°. Fourth, the structure and characteristics of the main components of  the Y5-47 centrifugal fan Y5-47 centrifugal fan consists of the impeller, the  casing, the air inlet, the transmission, the adjustment door and other parts.  1. Y5-47 boiler centrifugal fan impeller: There are 12 pieces of material, the  material is 16Mn rear inclined flat blade, the welding arc cone front plate and  the flat plate shape rear plate are corrected by static and dynamic balance,  therefore, the operation is stable and there is more High lightness and wear  resistance for long life. 2, Y5-47 centrifugal fan casing: welded steel plate  into a volute overall. NO8 above "left", "right" rotation  is common. 3. The air inlet of the fan of Y5-47 centrifugal boiler; the air  inlet of the convergence type is made into the whole structure, and is fixed to  the air inlet side of the casing by bolts. 4. Y5-47 centrifugal draft fan drive  set: The drive spindle is made of high quality steel, adopting rolling bearing  (II) type: integral barrel type bearing box, with 30# mechanical lubrication,  NO8 and above with oil level mark and thermometer, water cooling device It is  necessary to add a water pipe, the water consumption is 0.5-1m3/h, and the fan is self-cooling  below NO6. Type (I): NO4-6 uses two parallel bearing housings. Lubrication is  lubricated with bearing grease or molybdenum disulfide. It is self-cooled with  two semi-circular fans between the casing and NO8-12.4 with two parallel  bearing boxes. 5. Y5-47 centrifugal fan adjustment door: used to adjust the air  volume, the axial installation is in front of the air inlet, the rotation is  flexible and convenient, the adjustment range is from full opening to full  closing, the petal type is adopted above NO8, and the butterfly valve type is  adopted below NO6. To make the adjustment door work properly, it must maintain  a good lubrication state and use expansion grease.

9.png


Custom Industrial Fan:

Custom Industrial Fan, Y5-47  centrifugal fan product introduction Y5-47 centrifugal fan has a specific  number of revolutions between the centrifugal fan and the axial flow fan, and  has the higher pressure coefficient of the centrifugal fan and the higher flow  coefficient of the axial flow fan. . Y5-47 boiler centrifugal induced draft fan  is an early popular fan in China,  but it is also the most probable fan to date, its full-pressure efficiency can  reach 90.5%, mainly with burning various coal quality. The 1-20t/h industrial  boiler with smoke elimination and dust removal device is suitable for the Y5-47  centrifugal fan. 


However, the maximum temperature should not exceed 250 °C. Second, the Y5-47 boiler  centrifugal fan features the current industrial boiler series, the quality of  coal burning is very different, the resistance of the dust collector used is  different, the required air volume and wind pressure of the induced draft fan  are different, in order to adapt to the above In view of the economics of the  fan, the Y5-47 centrifugal fan requires more power than the induced draft fan  of the 20-ton boiler, while the (D-type) coupling is directly connected to the  transmission, and the rest are made of triangular tape (C type). ) Transmission,  Y5-47 centrifugal fan can not only meet the requirements of various dust  collectors of the same tonnage boiler with different speeds, but also reduce  the series and machine number of the fan, and it is also convenient for the  user to change according to the actual situation. Spindle speed to achieve the  desired air volume and wind pressure. 


The structure of Y5-47 centrifugal fan is  reasonable, the manufacturing process is relatively simple, the maintenance is  convenient, it is not easy to damage, and the warranty period is long. It is  still the mainstay in various fans matched with the boiler. Third, Y5-47  centrifugal boiler fan type 1, Y5-47 centrifugal fan can be made into two types  of left and right rotation. Y5-47 centrifugal fan from the transmission part of  the official fan, such as the impeller clockwise rotation is called right  rotation, with "right", counterclockwise rotation is called left  rotation, with "left". 2. The position of the air outlet of the Y5-47  centrifugal fan is expressed by the angle of the air outlet of the casing.  "Left" and "Right" can be made into three angles of  0°90°180°. Fourth, the structure and characteristics of the main components of  the Y5-47 centrifugal fan Y5-47 centrifugal fan consists of the impeller, the  casing, the air inlet, the transmission, the adjustment door and other parts.  1. Y5-47 boiler centrifugal fan impeller: There are 12 pieces of material, the  material is 16Mn rear inclined flat blade, the welding arc cone front plate and  the flat plate shape rear plate are corrected by static and dynamic balance,  therefore, the operation is stable and there is more High lightness and wear  resistance for long life. 2, Y5-47 centrifugal fan casing: welded steel plate  into a volute overall. NO8 above "left", "right" rotation  is common. 3. The air inlet of the fan of Y5-47 centrifugal boiler; the air  inlet of the convergence type is made into the whole structure, and is fixed to  the air inlet side of the casing by bolts. 4. Y5-47 centrifugal draft fan drive  set: The drive spindle is made of high quality steel, adopting rolling bearing  (II) type: integral barrel type bearing box, with 30# mechanical lubrication,  NO8 and above with oil level mark and thermometer, water cooling device It is  necessary to add a water pipe, the water consumption is 0.5-1m3/h, and the fan is self-cooling  below NO6. Type (I): NO4-6 uses two parallel bearing housings. Lubrication is  lubricated with bearing grease or molybdenum disulfide. It is self-cooled with  two semi-circular fans between the casing and NO8-12.4 with two parallel  bearing boxes. 5. Y5-47 centrifugal fan adjustment door: used to adjust the air  volume, the axial installation is in front of the air inlet, the rotation is  flexible and convenient, the adjustment range is from full opening to full  closing, the petal type is adopted above NO8, and the butterfly valve type is  adopted below NO6. To make the adjustment door work properly, it must maintain  a good lubrication state and use expansion grease.

9.png


Make a callOnline Message